VW / Audi 2.0T TFSI (GTI, A4, Q5) Fuel Injector Cleaning & Flow Testing

The Bosch 06H906036G is a GDI (direct injection) fuel injector used in VW/Audi 2.0T TFSI/TSI: GTI MK6/MK7, Jetta GLI, Passat B6, Tiguan, Beetle, CC, EOS; Audi A3/A4/A5/A6/Q3/Q5/TT (2008-2017). We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

Manufacturer	Bosch
Part number	06H906036G
Type	GDI (direct injection)
Connector	2-pin direct injection (Bosch piezo)

Get This Injector Serviced

Our measured results

These are the actual before-and-after numbers from our flow bench for the Bosch 06H906036G — not published estimates.

Tested in our shop	4 injector(s) @ 120.0 psi
Measured coil (avg)	1.9 Ω
10s open flow (avg)	52.75 → 51.25 ml (-2.8%)
60s pulsed flow (avg)	70.5 → 66.25 ml
Leak test after cleaning	4/4 PASS

Also known as / cross-references

The Bosch 06H906036G is interchangeable with or cross-references to these part numbers:

0261500076 (Bosch)06H906036AB

What vehicles use the Bosch 06H906036G?

VW/Audi 2.0T TFSI/TSI: GTI MK6/MK7, Jetta GLI, Passat B6, Tiguan, Beetle, CC, EOS; Audi A3/A4/A5/A6/Q3/Q5/TT (2008-2017)

How we service it

Every injector gets ultrasonic cleaning, backflushing, before-and-after flow testing (static and dynamic), leak testing, spray-pattern inspection, and new O-rings and micro-filter baskets where available — plus a detailed Injector Performance Report. Round-trip USPS shipping is $15 flat.

Frequently asked questions

What vehicles use the Bosch 06H906036G injector?

The Bosch 06H906036G is used in VW/Audi 2.0T TFSI/TSI: GTI MK6/MK7, Jetta GLI, Passat B6, Tiguan, Beetle, CC, EOS; Audi A3/A4/A5/A6/Q3/Q5/TT (2008-2017).

Can you clean and test a 06H906036G injector?

Yes. We ultrasonic-clean, backflush, and flow-test the Bosch 06H906036G on our bench, including before-and-after open and pulsed flow, leak testing, and spray-pattern inspection, with new O-rings where available.

What did the 06H906036G flow at?

On our bench, 4 06H906036G injectors averaged 52.75 ml open flow before cleaning and 51.25 ml after, tested at 120.0 psi.

How much does it cost?

Standard MPFI top-feed injectors are $30 each; side-feed, GDI, TBI and specialty injectors are $35 each. Round-trip shipping is $15 flat, 4-injector minimum.

How do I send them in?

Start an order on our Get Started page, ship your injectors to our Weymouth, MA shop, and we return them cleaned, tested, and documented.

Send in your 06H906036G injectors

Mail-in cleaning and flow testing with a full before/after report. 4-injector minimum, $15 flat round-trip shipping.

Get Started