Injector DatabaseRecently Serviced › Bosch DX23-9F593-AC
Bosch DX23-9F593-AC · Serviced & Flow-Tested

Jaguar / Land Rover 3.0L V6 GDI Fuel Injector Cleaning & Flow Testing

The Bosch DX23-9F593-AC is a GDI (direct injection) fuel injector used in Jaguar F-Type, XE, XF/XFR/XFR-S, XJ/XJR; Land Rover and Range Rover: Range Rover Sport, Range Rover, Velar, Discovery/LR4 - 3.0L supercharged V6 GDI (2013-2020). We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerBosch
Part numberDX23-9F593-AC
TypeGDI (direct injection)
ConnectorBosch GDI high-pressure (direct injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Bosch DX23-9F593-AC — not published estimates.

Tested in our shop8 injector(s) @ 120.0 psi
Measured coil (avg)1.9 Ω
10s open flow (avg)49.29 → 50.14 ml (+1.7%)
60s pulsed flow (avg)66.57 → 65.71 ml
Leak test after cleaning7/8 PASS

Also known as / cross-references

The Bosch DX23-9F593-AC is interchangeable with or cross-references to these part numbers:

0261500297 (Bosch)FX23-9F593-AC

What vehicles use the Bosch DX23-9F593-AC?

Jaguar F-Type, XE, XF/XFR/XFR-S, XJ/XJR; Land Rover and Range Rover: Range Rover Sport, Range Rover, Velar, Discovery/LR4 - 3.0L supercharged V6 GDI (2013-2020)

How we service it

Every injector gets ultrasonic cleaning, backflushing, before-and-after flow testing (static and dynamic), leak testing, spray-pattern inspection, and new O-rings and micro-filter baskets where available — plus a detailed Injector Performance Report. Round-trip USPS shipping is $15 flat.

Frequently asked questions

What vehicles use the Bosch DX23-9F593-AC injector?
The Bosch DX23-9F593-AC is used in Jaguar F-Type, XE, XF/XFR/XFR-S, XJ/XJR; Land Rover and Range Rover: Range Rover Sport, Range Rover, Velar, Discovery/LR4 - 3.0L supercharged V6 GDI (2013-2020).
Can you clean and test a DX23-9F593-AC injector?
Yes. We ultrasonic-clean, backflush, and flow-test the Bosch DX23-9F593-AC on our bench, including before-and-after open and pulsed flow, leak testing, and spray-pattern inspection, with new O-rings where available.
What did the DX23-9F593-AC flow at?
On our bench, 8 DX23-9F593-AC injectors averaged 49.29 ml open flow before cleaning and 50.14 ml after, tested at 120.0 psi.
How much does it cost?
Standard MPFI top-feed injectors are $30 each; side-feed, GDI, TBI and specialty injectors are $35 each. Round-trip shipping is $15 flat, 4-injector minimum.
How do I send them in?
Start an order on our Get Started page, ship your injectors to our Weymouth, MA shop, and we return them cleaned, tested, and documented.

Send in your DX23-9F593-AC injectors

Mail-in cleaning and flow testing with a full before/after report. 4-injector minimum, $15 flat round-trip shipping.

Get Started