Fuel Injector Database
Searchable specs for 238 OEM fuel injectors. Flow rate, impedance, rated pressure, and connector type.
Showing 238 of 238 injectors
| Part Number ↑ | Manufacturer | cc/min | lb/hr | @ Bar | Ohm | Connector |
|---|
About this data: Specs sourced from manufacturer reference sheets used in our shop.
Flow rates are at rated test pressure (typically 2.25–3 bar). Real-world flow varies with
installed fuel pressure — use our injector size calculator to convert
for your application.
Note on Keihin and JECS entries: The numbers shown are manufacture date codes printed on the injector body, not part numbers. They identify a family of injectors with the listed flow rate but cannot be used for exact replacement lookups.
Note on Keihin and JECS entries: The numbers shown are manufacture date codes printed on the injector body, not part numbers. They identify a family of injectors with the listed flow rate but cannot be used for exact replacement lookups.
Need These Injectors Cleaned or Tested?
Professional ultrasonic cleaning and flow testing on every injector in this database. Mail-in service from anywhere in the US.
Get Started — $30/InjectorInjectors We've Recently Serviced
Real injectors photographed, cleaned, and flow-tested in our shop. Each entry shows our measured before/after flow data plus published specs and cross-references where available. 14 jobs shown.
Fomoco
E7120171
TypeGDI Turbo (direct injection)
Tested in our shop4 injector(s) @ 120.0 psi
Measured continuity (avg)1.4 Ω
10s open flow (avg)59.5 → 63.75 ml (+7.1%)
60s pulsed flow (avg)89.0 → 91.0 ml
Leak test after cleaning4/4 PASS
Also known as:
- L3K9-13-250A
- E7T-20171
- E7T20171
Applications: Mazda 3 2.3L MZR DISI Turbo (2007-2013), Mazda 6 2.3L Turbo (2006-2007), CX-7 2.3L Turbo (2007-2011); MazdaSpeed platform
Marelli
IWP069
Published flow480 cc/min @ 3 bar
(46 lb/hr)
Published impedance13.7 Ω
ConnectorEV1 (Jetronic Cone, single-hole disc at 15°)
TypeMPFI (port injection)
Tested in our shop8 injector(s) @ 40.0 psi
Measured continuity (avg)14.59 Ω
10s open flow (avg)73.14 → 72.0 ml (-1.6%)
60s pulsed flow (avg)81.14 → 73.14 ml
Leak test after cleaning7/8 PASS
Also known as:
- 861260T (Mercury OEM)
- IWP-069
Applications: Mercury MerCruiser 350 MAG MPI, 454 MAG MPI, 502 MPI, 6.2L MPI, 8.2L MPI (1998-2002); Harley-Davidson; Ducati superbikes
Bosch
6DA-13761-00-00
ConnectorSumitomo port (EV14 platform)
TypeMPFI marine
Tested in our shop4 injector(s) @ 40.0 psi
Measured continuity (avg)12.45 Ω
10s open flow (avg)74.25 → 75.5 ml (+1.7%)
60s pulsed flow (avg)70.0 → 69.5 ml
Leak test after cleaning4/4 PASS
Also known as:
- Nikki EAT331
- 6DA137610000
Applications: Yamaha 2.8L outboards: F150, F175, F200 (Bosch-licensed Nikki injector)
Deka
109037
Seadoo Jetski
TypeMPFI marine PWC
Tested in our shop3 injector(s) @ 40.0 psi
Measured continuity (avg)12.6 Ω
10s open flow (avg)33.0 → 57.33 ml (+73.7%)
60s pulsed flow (avg)35.33 → 57.33 ml
Leak test after cleaning3/3 PASS
Also known as:
- 420874848 (Sea-Doo OEM set of 3)
Applications: Sea-Doo GTI/GTS 130 (2011-2015) PWC, Rotax 4-TEC
Delphi
25176061
Mercruiser 8.1
Published flow398 cc/min @ 3 bar
(38.9 lb/hr)
Published impedance12.0 Ω
ConnectorMini (Delphi Multec II)
TypeMPFI marine + automotive
Tested in our shop8 injector(s) @ 40.0 psi
Measured continuity (avg)12.45 Ω
10s open flow (avg)63.5 → 65.0 ml (+2.4%)
60s pulsed flow (avg)57.38 → 55.88 ml
Leak test after cleaning8/8 PASS
Also known as:
- 17113739
- 25348180
Applications: Mercury MerCruiser 8.1L MPI: 496 MAG, 496 HO, 8.1S MPI, 8.1L HO; also GM Vortec 4.8L/5.3L/6.0L/8.1L (1999-2007)
Bosch
06H906036G
Volkswagen gti
Connector2-pin direct injection (Bosch piezo)
TypeGDI (direct injection)
Tested in our shop4 injector(s) @ 120.0 psi
Measured continuity (avg)1.9 Ω
10s open flow (avg)52.75 → 51.25 ml (-2.8%)
60s pulsed flow (avg)70.5 → 66.25 ml
Leak test after cleaning4/4 PASS
Also known as:
- 0261500076 (Bosch)
- 06H906036AB
Applications: VW/Audi 2.0T TFSI/TSI: GTI MK6/MK7, Jetta GLI, Passat B6, Tiguan, Beetle, CC, EOS; Audi A3/A4/A5/A6/Q3/Q5/TT (2008-2017)
Bosch
12569113
2007 C6 corvette
Published flow360 cc/min @ 4 bar
(33.9 lb/hr)
ConnectorEV14 / USCAR
TypeMPFI (port injection)
Tested in our shop8 injector(s) @ 40.0 psi
Measured continuity (avg)12.57 Ω
10s open flow (avg)49.88 → 50.25 ml (+0.7%)
60s pulsed flow (avg)52.62 → 53.38 ml
Leak test after cleaning8/8 PASS
Also known as:
- 0280158049 (Bosch)
Applications: GM LS2 6.0L: Corvette C6, Pontiac GTO, Cadillac CTS-V (2005-2007); 48.5mm O-ring length (medium)
Keihin
16450-RBB-003
2007 Honda civic Si k20z3
Published flow320 cc/min @ 3 bar
Published impedance12 Ω
ConnectorHonda OBD2 / Keihin V (EV6 standard size)
TypeMPFI (port injection)
Tested in our shop4 injector(s) @ 40.0 psi
Measured continuity (avg)10.45 Ω
10s open flow (avg)54.5 → 55.5 ml (+1.8%)
60s pulsed flow (avg)54.0 → 54.75 ml
Leak test after cleaning4/4 PASS
Also known as:
- 12294 (Keihin internal)
- 842-12294
Applications: Honda Civic Si K20Z3 (2006-2011), Acura TSX 2.4L (2004-2008), Acura RSX K20A2/K20A3, Acura CSX, Honda Accord/CR-V K-series; 8-hole nozzle, V spray pattern
Bosch
63P13761
Yamaha outboard
TypeMPFI marine
Tested in our shop4 injector(s) @ 40.0 psi
Measured continuity (avg)12.45 Ω
10s open flow (avg)42.25 → 50.0 ml (+18.3%)
60s pulsed flow (avg)49.75 → 54.5 ml
Leak test after cleaning4/4 PASS
Also known as:
- 63P137610000
- Nikki EAT152
- Yamaha 63P-13761
Applications: Yamaha F150 4-stroke V4 outboard (2004-2013). Body is Bosch-licensed Nikki.
Deatschwerks
17U-00-0090-6
Cobra jet mustang
TypeRace (high-flow EV14)
Tested in our shop8 injector(s) @ 45.0 psi
Measured continuity (avg)12.55 Ω
10s open flow (avg)85.25 → 85.25 ml (+0.0%)
60s pulsed flow (avg)59.25 → 59.62 ml
Leak test after cleaning8/8 PASS
Applications: Cobra Jet Mustang race application — Deatschwerks EV14-based race injector. Exact flow rating not published in catalog (custom Cobra Jet spec).
Denso
23250-75050
Published flow298 cc/min @ 3 bar
(28.4 lb/hr)
Published impedance14 Ω
ConnectorDenso (single-hole nozzle with 4-hole splitter cone spray)
TypeMPFI (port injection)
Tested in our shop4 injector(s) @ 40.0 psi
Measured continuity (avg)14.22 Ω
10s open flow (avg)51.0 → 52.75 ml (+3.4%)
60s pulsed flow (avg)52.75 → 53.75 ml
Leak test after cleaning4/4 PASS
Also known as:
- 23209-75050
- Delphi FJ10292
- Bostech MP4111
- Wells M694
Applications: Toyota 4Runner, Tacoma, T100 2.7L I4 3RZ-FE (1995-2000)
Bosch
CDH210
Yamaha f series
Published flow230 cc/min @ 3 bar
(21.9 lb/hr)
Connector2-pin (compact)
TypeMPFI marine + automotive
Tested in our shop4 injector(s) @ 40.0 psi
Measured continuity (avg)15.1 Ω
10s open flow (avg)40.5 → 42.75 ml (+5.6%)
60s pulsed flow (avg)47.5 → 50.5 ml
Leak test after cleaning4/4 PASS
Also known as:
- Nikki CDH210
- INP771
- MD319791
- 68V8A3600000
- 15710-65D00
Applications: Yamaha F115 outboard (2000-2015); also Mitsubishi Eclipse/Galant/Mirage, Chevrolet Tracker, Chrysler Sebring, Suzuki Vitara 2.0L/3.0L. Body is Bosch-licensed Nikki.
Bosch
879312003
Volvo Penta v6
TypeMPFI marine
Tested in our shop6 injector(s) @ 40.0 psi
Measured continuity (avg)12.87 Ω
10s open flow (avg)45.0 → 45.33 ml (+0.7%)
60s pulsed flow (avg)52.0 → 52.33 ml
Leak test after cleaning6/6 PASS
Applications: Volvo Penta 4.3L, 5.0L, 5.3L, 6.2L sterndrive (2007+); GM Vortec architecture
Bosch
6DA-13761-00-00
Yamaha outboard
ConnectorSumitomo port (EV14 platform)
TypeMPFI marine
Also known as:
- Nikki EAT331
- 6DA137610000
Applications: Yamaha 2.8L F150/F175/F200 outboard (same as capture #3)