Injector Database › Recently Serviced › Deatschwerks 17U-00-0090-6
Deatschwerks 17U-00-0090-6 fuel injectorDeatschwerks 17U-00-0090-6 fuel injector photo 2Deatschwerks 17U-00-0090-6 fuel injector photo 3Deatschwerks 17U-00-0090-6 fuel injector photo 4Deatschwerks 17U-00-0090-6 fuel injector photo 5
1 / 5
Deatschwerks 17U-00-0090-6 · Serviced & Flow-Tested

Cobra Jet Mustang Race (Deatschwerks EV14) Fuel Injector Cleaning & Flow Testing

The Deatschwerks 17U-00-0090-6 is a Race (high-flow EV14) fuel injector used in Cobra Jet Mustang race application — Deatschwerks EV14-based race injector. Exact flow rating not published in catalog (custom Cobra Jet spec).. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerDeatschwerks
Part number17U-00-0090-6
TypeRace (high-flow EV14)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Deatschwerks 17U-00-0090-6 — not published estimates.

Tested in our shop8 injector(s) @ 45.0 psi
Measured coil (avg)12.55 Ω
10s open flow (avg)85.25 → 85.25 ml (+0.0%)
60s pulsed flow (avg)59.25 → 59.62 ml
Leak test after cleaning8/8 PASS

What vehicles use the Deatschwerks 17U-00-0090-6?

Cobra Jet Mustang race application — Deatschwerks EV14-based race injector. Exact flow rating not published in catalog (custom Cobra Jet spec).

How we service it

Every injector gets ultrasonic cleaning, backflushing, before-and-after flow testing (static and dynamic), leak testing, spray-pattern inspection, and new O-rings and micro-filter baskets where available — plus a detailed Injector Performance Report. Round-trip USPS shipping is $15 flat.

Frequently asked questions

What vehicles use the Deatschwerks 17U-00-0090-6 injector?
The Deatschwerks 17U-00-0090-6 is used in Cobra Jet Mustang race application — Deatschwerks EV14-based race injector. Exact flow rating not published in catalog (custom Cobra Jet spec)..
Can you clean and test a 17U-00-0090-6 injector?
Yes. We ultrasonic-clean, backflush, and flow-test the Deatschwerks 17U-00-0090-6 on our bench, including before-and-after open and pulsed flow, leak testing, and spray-pattern inspection, with new O-rings where available.
What did the 17U-00-0090-6 flow at?
On our bench, 8 17U-00-0090-6 injectors averaged 85.25 ml open flow before cleaning and 85.25 ml after, tested at 45.0 psi.
How much does it cost?
Standard MPFI top-feed injectors are $30 each; side-feed, GDI, TBI and specialty injectors are $35 each. Round-trip shipping is $15 flat, 4-injector minimum.
How do I send them in?
Start an order on our Get Started page, ship your injectors to our Weymouth, MA shop, and we return them cleaned, tested, and documented.

Send in your 17U-00-0090-6 injectors

Mail-in cleaning and flow testing with a full before/after report. 4-injector minimum, $15 flat round-trip shipping.

Get Started