Injector Database › Mopar 5245344
Mopar 5245344 · Serviced & Flow-Tested

Dodge Viper V10 Fuel Injector Cleaning & Flow Testing

The Mopar 5245344 is a MPFI (port injection) fuel injector used in Dodge Viper V10. Genuine Mopar injector, part 5245344 (stamped 05245344 on the connector). A full set of 10 came through the shop.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerMopar
Part number5245344
TypeMPFI (port injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Mopar 5245344 — not published estimates.

Tested in our shop10 injector(s) @ 42.5 psi
Measured coil (avg)12.35 Ω
10s open flow (avg)43.1 → 43.3 ml (+0.5%)
60s pulsed flow (avg)51.2 → 50.7 ml
Leak test after cleaning10/10 PASS

Also known as / cross-references

The Mopar 5245344 is interchangeable with or cross-references to these part numbers:

05245344

What vehicles use the Mopar 5245344?

Dodge Viper V10. Genuine Mopar injector, part 5245344 (stamped 05245344 on the connector). A full set of 10 came through the shop.

How we service the Mopar 5245344

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 42.5 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the 5245344 flow at on your bench?
On our bench, 10 5245344 injectors averaged 43.1 ml open flow before cleaning and 43.3 ml after, tested at 42.5 psi.

Send in your 5245344 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started