Injector Database › JECS A46-Z00
JECS A46-Z00 · Serviced & Flow-Tested

Nissan 300ZX (Z32) VG30DE / VG30DETT Fuel Injector Cleaning & Flow Testing

The JECS A46-Z00 is a MPFI side-feed (port injection) fuel injector used in Nissan 300ZX (Z32) 3.0L V6 — VG30DE naturally aspirated and VG30DETT twin turbo (1990-1996), also the JDM Fairlady Z. JECS side-feed injector. A46-Z00 is the stamp on the body, which JECS uses as a date/batch code rather than a true part number, so identify a replacement by color, connector and style, not by that code. The Z32 is one of the few platforms that runs a side-feed injector rather than the usual top-feed design.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerJECS
Part numberA46-Z00
TypeMPFI side-feed (port injection)
ConnectorJECS side-feed

Our measured results

These are the actual before-and-after numbers from our flow bench for the JECS A46-Z00 — not published estimates.

Tested in our shop6 injector(s) @ 40.0 psi
Measured coil (avg)11.4 Ω
10s open flow (avg)94.33 → 96.33 ml (+2.1%)
60s pulsed flow (avg)108.17 → 107.83 ml
Leak test after cleaning6/6 PASS

What vehicles use the JECS A46-Z00?

Nissan 300ZX (Z32) 3.0L V6 — VG30DE naturally aspirated and VG30DETT twin turbo (1990-1996), also the JDM Fairlady Z. JECS side-feed injector. A46-Z00 is the stamp on the body, which JECS uses as a date/batch code rather than a true part number, so identify a replacement by color, connector and style, not by that code. The Z32 is one of the few platforms that runs a side-feed injector rather than the usual top-feed design.

How we service the JECS A46-Z00

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 40 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the A46-Z00 flow at on your bench?
On our bench, 6 A46-Z00 injectors averaged 94.33 ml open flow before cleaning and 96.33 ml after, tested at 40.0 psi.

Send in your A46-Z00 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started