Injector DatabaseRecently Serviced › Injector Dynamics ID850
Injector Dynamics ID850 · Serviced & Flow-Tested

Cadillac CTS-V LSA / Universal Performance Fuel Injector Cleaning & Flow Testing

The Injector Dynamics ID850 is a EV14 high-impedance (aftermarket performance) fuel injector used in Universal high-performance injector (GM LS incl. LSA supercharged, Ford Coyote/Modular, and many import platforms). This set came out of a 2010 Cadillac CTS-V 6.2L LSA V8.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerInjector Dynamics
Part numberID850
TypeEV14 high-impedance (aftermarket performance)
ConnectorUSCAR
Published flow885 cc/min @ 3 bar

Our measured results

These are the actual before-and-after numbers from our flow bench for the Injector Dynamics ID850 — not published estimates.

Tested in our shop8 injector(s) @ 40.0 psi
Measured coil (avg)12.38 Ω
10s open flow (avg)70.25 → 69.88 ml (-0.5%)
60s pulsed flow (avg)106.25 → 107.5 ml
Leak test after cleaning8/8 PASS

What vehicles use the Injector Dynamics ID850?

Universal high-performance injector (GM LS incl. LSA supercharged, Ford Coyote/Modular, and many import platforms). This set came out of a 2010 Cadillac CTS-V 6.2L LSA V8.

How we service it

Every injector gets ultrasonic cleaning, backflushing, before-and-after flow testing (static and dynamic), leak testing, spray-pattern inspection, and new O-rings and micro-filter baskets where available — plus a detailed Injector Performance Report. Round-trip USPS shipping is $15 flat.

Frequently asked questions

What vehicles use the Injector Dynamics ID850 injector?
The Injector Dynamics ID850 is used in Universal high-performance injector (GM LS incl. LSA supercharged, Ford Coyote/Modular, and many import platforms). This set came out of a 2010 Cadillac CTS-V 6.2L LSA V8..
Can you clean and test a ID850 injector?
Yes. We ultrasonic-clean, backflush, and flow-test the Injector Dynamics ID850 on our bench, including before-and-after open and pulsed flow, leak testing, and spray-pattern inspection, with new O-rings where available.
What did the ID850 flow at?
On our bench, 8 ID850 injectors averaged 70.25 ml open flow before cleaning and 69.88 ml after, tested at 40.0 psi.
How much does it cost?
Standard MPFI top-feed injectors are $30 each; side-feed, GDI, TBI and specialty injectors are $35 each. Round-trip shipping is $15 flat, 4-injector minimum.
How do I send them in?
Start an order on our Get Started page, ship your injectors to our Weymouth, MA shop, and we return them cleaned, tested, and documented.

Send in your ID850 injectors

Mail-in cleaning and flow testing with a full before/after report. 4-injector minimum, $15 flat round-trip shipping.

Get Started