
Honda BF60 60 HP Outboard Fuel Injector Cleaning & Flow Testing
The Keihin 16450-ZZ3-003 is a MPFI marine (port injection) fuel injector used in Honda BF60A / BFP60A 60 HP 4-stroke outboard (3 cylinders, so 3 injectors per motor). Keihin body marked FH10. Not the same as 16450-ZZ5-003 (BF40D / BF50D) or 16450-ZY9-003 (BF75 / BF90).. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.
| Manufacturer | Keihin |
| Part number | 16450-ZZ3-003 |
| Type | MPFI marine (port injection) |
Our measured results
These are the actual before-and-after numbers from our flow bench for the Keihin 16450-ZZ3-003 — not published estimates.
| Tested in our shop | 3 injector(s) @ 43.5 psi |
| Measured coil (avg) | 10.63 Ω |
| 10s open flow (avg) | 28.0 → 30.0 ml (+7.1%) |
| 60s pulsed flow (avg) | 27.67 → 27.33 ml |
| Leak test after cleaning | 3/3 PASS |
Also known as / cross-references
The Keihin 16450-ZZ3-003 is interchangeable with or cross-references to these part numbers:
16450ZZ3003What vehicles use the Keihin 16450-ZZ3-003?
Honda BF60A / BFP60A 60 HP 4-stroke outboard (3 cylinders, so 3 injectors per motor). Keihin body marked FH10. Not the same as 16450-ZZ5-003 (BF40D / BF50D) or 16450-ZY9-003 (BF75 / BF90).
How we service the Keihin 16450-ZZ3-003
Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 43.5 psi, new seals and filter baskets where available. Full process on our services page.
Frequently asked questions
What did the 16450-ZZ3-003 flow at on your bench?
Send in your 16450-ZZ3-003 injectors
Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.
Get Started





