Injector Database › Honda Keihin M
Honda Keihin M · Serviced & Flow-Tested

Honda V6 Outboard Fuel Injector Cleaning & Flow Testing

The Honda Keihin M is a MPFI marine (port injection) fuel injector used in Honda V6 outboard (6 injectors per motor). Keihin marks these with a letter code, here M, instead of printing the Honda number. Honda's V6 outboards (BF200 / BF225 / BF250, 2007 on) list 16450-ZY6-003, six per motor; confirm against your engine serial before ordering.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerHonda
Part numberKeihin M
TypeMPFI marine (port injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Honda Keihin M — not published estimates.

Tested in our shop6 injector(s) @ 43.5 psi
Measured coil (avg)11.43 Ω
10s open flow (avg)48.5 → 49.5 ml (+2.1%)
60s pulsed flow (avg)59.83 → 56.17 ml
Leak test after cleaning6/6 PASS

What vehicles use the Honda Keihin M?

Honda V6 outboard (6 injectors per motor). Keihin marks these with a letter code, here M, instead of printing the Honda number. Honda's V6 outboards (BF200 / BF225 / BF250, 2007 on) list 16450-ZY6-003, six per motor; confirm against your engine serial before ordering.

How we service the Honda Keihin M

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 43.5 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the Keihin M flow at on your bench?
On our bench, 6 Keihin M injectors averaged 48.5 ml open flow before cleaning and 49.5 ml after, tested at 43.5 psi.

Send in your Keihin M injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started