Injector Database › Siemens Deka 39-040
Siemens Deka 39-040 · Serviced & Flow-Tested

Mercury EFI Outboard (Siemens Deka) Fuel Injector Cleaning & Flow Testing

The Siemens Deka 39-040 is a MPFI marine (port injection) fuel injector used in Mercury EFI outboards. Siemens Deka (now Continental) injector with the purple band, body stamped 39-040. Two sets through the shop so far (Sep and Oct 2026), both clean flowers that matched within a couple of ml.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerSiemens Deka
Part number39-040
TypeMPFI marine (port injection)
Published flow444 cc/min @ ? bar
Published impedance12.7 Ω

Our measured results

These are the actual before-and-after numbers from our flow bench for the Siemens Deka 39-040 — not published estimates.

Tested in our shop8 injector(s) @ 40.0 psi
Measured coil (avg)12.67 Ω
10s open flow (avg)73.75 → 74.88 ml (+1.5%)
60s pulsed flow (avg)72.62 → 70.62 ml
Leak test after cleaning8/8 PASS

What vehicles use the Siemens Deka 39-040?

Mercury EFI outboards. Siemens Deka (now Continental) injector with the purple band, body stamped 39-040. Two sets through the shop so far (Sep and Oct 2026), both clean flowers that matched within a couple of ml.

Our bench record on the 39-040

We’ve flow-tested 8 Siemens Deka 39-040 injectors across 2 customer jobs since September 2026. 0 of them (0%) came in flowing more than 10% under their own clean flow, and every one passed the leak test after cleaning. Every job, oldest first (open flow is the 10-second average per set):

JobInjectorsTest psiAvg flow before → afterCame in lowLeak test after
Sep 202644072.5 → 74.0 ml0 of 44/4
Oct 2026443.575.0 → 75.8 ml0 of 44/4

How we service the Siemens Deka 39-040

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 40 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the 39-040 flow at on your bench?
On our bench, 8 39-040 injectors averaged 73.75 ml open flow before cleaning and 74.88 ml after, tested at 40.0 psi.
How often does a 39-040 come in dirty?
Of the 8 39-040 injectors we've tested across 2 jobs, 0 (0%) came in flowing more than 10% under what they flowed once clean.

Send in your 39-040 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started