
Tohatsu / Nissan TLDI 40-90 HP (Air Injector) Fuel Injector Cleaning & Flow Testing
The Tohatsu 3G-10310-0 is a DFI marine (air-assisted 2-stroke DI, air side) fuel injector used in Tohatsu TLDI 2-stroke direct-injection outboards: MD40B, MD50B, MD70B, MD90B (40-90 HP); also sold under Nissan Marine branding. Air injector for the air-assisted direct injection system — runs alongside a Deka fuel injector on the same powerhead.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.
| Manufacturer | Tohatsu |
| Part number | 3G-10310-0 |
| Type | DFI marine (air-assisted 2-stroke DI, air side) |
Our measured results
These are the actual before-and-after numbers from our flow bench for the Tohatsu 3G-10310-0 — not published estimates.
| Tested in our shop | 6 injector(s) @ 50.0 psi |
| Measured coil (avg) | 1.95 Ω |
| 10s open flow (avg) | 64.83 → 79.17 ml (+22.1%) |
| 60s pulsed flow (avg) | 50.83 → 55.83 ml |
| Leak test after cleaning | 6/6 PASS |
Also known as / cross-references
The Tohatsu 3G-10310-0 is interchangeable with or cross-references to these part numbers:
30F-10310-03Y7-10310-0 (family)What vehicles use the Tohatsu 3G-10310-0?
Tohatsu TLDI 2-stroke direct-injection outboards: MD40B, MD50B, MD70B, MD90B (40-90 HP); also sold under Nissan Marine branding. Air injector for the air-assisted direct injection system — runs alongside a Deka fuel injector on the same powerhead.
How we service the Tohatsu 3G-10310-0
Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 50 psi, new seals and filter baskets where available. Full process on our services page.
Frequently asked questions
What did the 3G-10310-0 flow at on your bench?
Send in your 3G-10310-0 injectors
Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.
Get Started


