Injector Database › Denso 16611AA720
Denso 16611AA720 · Serviced & Flow-Tested

Subaru Impreza WRX STI 2.5L Fuel Injector Cleaning & Flow Testing

The Denso 16611AA720 is a MPFI turbo (port injection) fuel injector used in Subaru Impreza WRX STI 2.5L turbo EJ257 (2006-2014), also listed by Subaru for later WRX STI. The factory STI injector with the blue Denso body, often called the 565cc STI injector.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerDenso
Part number16611AA720
TypeMPFI turbo (port injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Denso 16611AA720 — not published estimates.

Tested in our shop4 injector(s) @ 43.5 psi
Measured coil (avg)12.22 Ω
10s open flow (avg)90.75 → 94.0 ml (+3.6%)
60s pulsed flow (avg)80.75 → 81.25 ml
Leak test after cleaning4/4 PASS

What vehicles use the Denso 16611AA720?

Subaru Impreza WRX STI 2.5L turbo EJ257 (2006-2014), also listed by Subaru for later WRX STI. The factory STI injector with the blue Denso body, often called the 565cc STI injector.

How we service the Denso 16611AA720

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 43.5 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the 16611AA720 flow at on your bench?
On our bench, 4 16611AA720 injectors averaged 90.75 ml open flow before cleaning and 94.0 ml after, tested at 43.5 psi.

Send in your 16611AA720 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started