Injector Database › Denso 23250-22040
Denso 23250-22040 · Serviced & Flow-Tested

Toyota Corolla / Matrix 1.8L 1ZZ-FE Fuel Injector Cleaning & Flow Testing

The Denso 23250-22040 is a MPFI (port injection) fuel injector used in Toyota 1.8L 1ZZ-FE: Corolla, Matrix, Celica and MR2 Spyder (about 2000-2007), plus the Pontiac Vibe. Green Denso body.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerDenso
Part number23250-22040
TypeMPFI (port injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Denso 23250-22040 — not published estimates.

Tested in our shop4 injector(s) @ 43.5 psi
Measured coil (avg)14.07 Ω
10s open flow (avg)38.5 → 45.25 ml (+17.5%)
60s pulsed flow (avg)48.25 → 53.25 ml
Leak test after cleaning4/4 PASS

Also known as / cross-references

The Denso 23250-22040 is interchangeable with or cross-references to these part numbers:

23209-2204023250-0D040

What vehicles use the Denso 23250-22040?

Toyota 1.8L 1ZZ-FE: Corolla, Matrix, Celica and MR2 Spyder (about 2000-2007), plus the Pontiac Vibe. Green Denso body.

How we service the Denso 23250-22040

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 43.5 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the 23250-22040 flow at on your bench?
On our bench, 4 23250-22040 injectors averaged 38.5 ml open flow before cleaning and 45.25 ml after, tested at 43.5 psi.

Send in your 23250-22040 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started