Injector Database › Denso 23250-50040
Denso 23250-50040 · Serviced & Flow-Tested

Toyota / Lexus 4.7L V8 2UZ-FE Fuel Injector Cleaning & Flow Testing

The Denso 23250-50040 is a MPFI (port injection) fuel injector used in Toyota and Lexus 4.7L V8 (2UZ-FE): Tundra, 4Runner, Sequoia, Land Cruiser, Lexus GX470 and LX470 (about 1998-2006). Not the 4.0L 1UZ-FE injector, which uses different Denso numbers.. We ultrasonic-clean and flow-test injectors like this one in our shop, then send back before-and-after data so you know exactly what you're getting.

ManufacturerDenso
Part number23250-50040
TypeMPFI (port injection)

Our measured results

These are the actual before-and-after numbers from our flow bench for the Denso 23250-50040 — not published estimates.

Tested in our shop8 injector(s) @ 40.0 psi
Measured coil (avg)14.0 Ω
10s open flow (avg)43.38 → 44.75 ml (+3.2%)
60s pulsed flow (avg)51.38 → 51.5 ml
Leak test after cleaning8/8 PASS

What vehicles use the Denso 23250-50040?

Toyota and Lexus 4.7L V8 (2UZ-FE): Tundra, 4Runner, Sequoia, Land Cruiser, Lexus GX470 and LX470 (about 1998-2006). Not the 4.0L 1UZ-FE injector, which uses different Denso numbers.

How we service the Denso 23250-50040

Ultrasonic clean, backflush, before-and-after flow and leak test, spray check, tested at 40 psi, new seals and filter baskets where available. Full process on our services page.

Frequently asked questions

What did the 23250-50040 flow at on your bench?
On our bench, 8 23250-50040 injectors averaged 43.38 ml open flow before cleaning and 44.75 ml after, tested at 40.0 psi.

Send in your 23250-50040 injectors

Mail-in cleaning and flow testing with a full before/after report. 2-injector minimum, $15 flat round-trip shipping.

Get Started